EX-NEXT Black SP w/MINI-Z EVO Double Receiver

No. 10745
End of production

<Includes MINI-Z EVO Receiver Unit EX-NEXT MC-8>
[Specifications]
●Dimensions:240.5×163.0×107.2mm(Does not include protrusions)
●Weight: 551g(battery not included )
●Power supply: AAA size dry battery, Ni-MH battery x4 (sold separately)
 Li-Fe battery(2cell 6.6V)(sold separately)
 Li-Po battery(2cell 7.4V)(sold separately)
●Current: 200mA or less
●Channel:PWM 4ch/ Serial 8ID
  *Maximum setting ID number of serial are different by each products.
●Frequency: 2.4GHz
●Radio Mode: XT
●Model memory 50
●Compatible receiver: KR-420XT, " MINI-Z EVO Receiver Unit EX-NEXT MC-8"

*EX-NEXT "MINI-Z Mode" and "MINI-Z EVO Receiver Unit EX-NEXT MC-8" do not support the telemetry function.

*The conventional "MINI-Z EVO Receiver Unit 82040" is not compatible with this product.

*This product’s manual is not included in the package, please download from  here.
*If you use Li-fe, Li-po, you must use with our option unit (Battery stand Unit).
*Can not use LCD Xpansion unit EXP-104 series.
*Can not use FHSS or DSSS receiver. (KR-418FH KR-415FHD,KR-210S etc)
*The product photos on this site are prototypes, which may be different to production models.

Made in Japan

  • This set is no longer in production. Please use "EX-NEXT Black SP w/MINI-Z EVO2 Double Receiver Unit" as an alternative.

    Please refer to the table below for compatible models of receiver units.

     

    Black painted version available in the lineup

    A new black color has been added to the EX-NEXT lineup. Instead of simple solid black paint, it is painted in black with pearl. The matt texture gives it a luxurious feel.

     

    The painted areas are the master unit and the standard grip stand.

    The stand for the Expert grip unit LDT is not painted.

     

    The aluminum steering wheel has been changed to a new design.

     

    The Long-Awaited MINI-Z Set

    This transmitter/receiver set includes the MINI-Z EVO Receiver Unit EX-NEXT MC-8, which can be used with the MINI-Z EVO. The evolved EX-NEXT's high-speed response can be used with the MINI-Z EVO.

     

     

    Firmware Ver.2.00 compatible with MINI-Z

    Firmware Ver.2.00 is released to use MINI-Z EVO with EX-NEXT. This set of EX-NEXT is preset with Ver.2.00.

    If you already have EX-NEXT

    If you already have EX-NEXT, you can update it to Ver. 2.00 to make it compatible with MINI-Z EVO. Please download the software and files necessary for uploading from the following links.  *The ICS USB Adapter HS is required for the update.

    "EX-NEXT Updater, Update file"
     

     

    Equipped with a new standard "XT" that achieves the fastest communication speed in the industry​.

    You can choose and use from "XT advanced mode" which is the world record response for one way communication and "XT telemetry mode" which is compatible for Telemetry ( 2 ways communication).

    In addition, starting with Update Ver. 2.00, a new "MINI-Z Mode" has been implemented to support MINI-Z.

     

    MINI-Z Mode

    EX-NEXT was newly developed by reviewing the design of the control and communication systems from the ground up. It achieves the industry's fastest communication speed and high resolution. In MINI-Z Mode, it outperforms FHSS such as the EX-RR, which has been the fastest.The EX-NEXT's high-speed communication increases the density of information that can be transmitted to the machine. You can experience the "fine and smooth control feeling" brought about by unprecedented high-definition, high-resolution control.

    *MINI-Z mode does not support the Telemetry function.

     

    XT Advanced Mode, XT Telemetry Mode

    This product is not dedicated to MINI-Z. When combined with the KR-420XT receiver can also be used with general-purpose RC cars without the need to change the firmware. The combination of the ultra-fast XT Advanced Mode, the bi-directional XT Telemetry Mode, and the serial servo 4S allows you to experience the dramatic evolution of high-speed performance from FHSS. For details, please refer to the product page of the set with KR-420XT.

     

    Please note: Switching the RF mode

    You can switch between XT Advanced Mode, XT Telemetry Mode, and MINI-Z Mode by setting the RF Mode in EX-NEXT. (Set the RF mode to "MINI-Z Mode" when using the MINI-Z.) Also, the default setting is "XT telemetry mode", so if you want to use it in MINI-Z Mode, please change it to "MINI-Z Mode" first.

    RF mode can be set for each model memory in order to be able to use it on a variety of machines. When adding a new model memory, please be sure to set the RF mode first. For details on how to set the RF mode, please refer to the "EX-NEXT Instruction Manual".
    When the RF mode is set to "MINI-Z Mode", the LED on the EX-NEXT unit repeats "blue -> light blue -> blue -> light blue" alternately, so please check it.

     

    Adjust the Gyro sensitivity at the Transmitter

    The EX-NEXT allows you to adjust the sensitivity of the gyro installed in the MINI-Z from the transmitter at hand. The sensitivity can be adjusted using the 3CH/4CH "GYRO" function. The sensitivity can be easily adjusted from the control console without connecting the machine to a PC, allowing fine adjustments while running the machine.

     

     

    Intuitive alert function with vibration and full-color LED

    Equipped with a vibration motor that has been requested. This can be used for alarms that notify the running time and alerts for various sensors. In addition, the LED on the front of the master unit is a full-color LED. The radio wave mode in use and the alert content of the vibration motor can now be identified by the LED lighting pattern.

     

    Can be replaced with the Color Grip2 of your choice.

    The "Color Grip2" already on sale can be attached. Choose your favorite color from a wide range of variations.

     

    New Drop down extension Unit 2.1

    Tune up for EX-NEXT

    Tuned for the evolution of the EX-NEXT to match the fastest feeling master unit as an exclusive use unit.

    Superior durability and operation feeling led by new angle sensor.

    Prevents deterioration of durability and operational feeling due to wear, which can be said to be the problem of contact sensors. Along with smooth operation feeling by smoother sliding, we realize high durability that is approximately 100 times compared with the prior sensor. Therefore, the best feeling of operation can be maintained for a long time. In addition, the new sensor outputs a more linear signal to the Master Unit. You can control the ESC and servo with a detailed operation sense. A realization of a sense of unity between people and cars.

    Increased the number of ball bearings that support the steering shaft for higher accuracy!

    The number of ball bearings supporting the steering shaft has been increased from one to two. The double-support type supports higher precision operation and reliability.

     

     

    The soft spring which can be operated with a constant tension.

    The normal spring included in the extension unit has been modified. The previous spring used was a progressive spring becoming stiffer as the wheel angle increased, but the new softer spring give a linear stiffness as the wheel angle increases. Since the spring tension can be adjusted, you can set the spring tension to your personal preference.

     

    Firmware update function.​

    Firmware update function is supported with the use of the ICS USB Adapter HS.
    Please refer below pages for information about update.
    EX-NEXT Updater, Update file

    *Window PC and ICS USB adapter HS are necessary for update.
    *Firmware for EX-NEXT can only be used for this product.  It cannot be used with EX-RR/LDT/2/6/6R.

     

    EX-NEXT function list

    <Telemetry>
    RF mode/Response/REAL TIME ICS/Battery fail safe

    <MODEL>
    Model select /Model name/ Model copy /Model reset /50 model

    <System>
    Display / Battery / Calculator / Sound/ VR information / Setting /Key speed /Menu speed  /Display language / Operation timer /User timer / All reset

    <Steering>
    Travel/ Balance / Trim /Sub Trim / Trim rate / Speed turn(2way) / Speed return(2way) / Curve / Punch / Feel / Response / Steering Auto Trim /Steering Auto balance/Reverse

    <Throttle>Travel F / Travel B / Trim /Sub trim / Trim rate / Speed turn(3way) / Speed return(3way) / Curve / Punch / Feel / Response / Push control / Acceleration / ABS /Auto Start / Idle up / Neutral brake / Over ride / Reverse / Brake in / Hand brake

    <3ch/4ch>
    Key setting/ 2WAY / 3WAY / 5WAY / Analog/ Gyro / Twin servo / 4WS/AMP mixing
     /Throttle mixing / Trim set 

    <5ch-8ch>
    Key setting/ 2WAY / 3WAY / 5WAY / Analog

    <Timer>
    Timer Start / Trigger start / Lap history / Start stop key/Lap key /Lap navi / Alarm time/ Pre alarm / Aram mode / Timer mode (Lap timer/ Down timer)

    * MINI-Z is a product and registered trademark of KYOSHO CORPORATION.

    Contents

    Contents:

    Master Unit EX-NEXT (Black SP) x1
    LCD Xpansion Unit2 EXP-201 x1
    Aluminum Steering Wheel6 x1
    Drop extension Unit 2.1 x1
    Expert grip unit 2 (Black SP) x1

    Receiver: MINI-Z EVO Receiver Unit EX-NEXT MC-8 ×2

    *Battery, Dry batteries are sold separately

  • EX-NEXT Black SP w/MINI-Z EVO Receiver Unit

    End of production
    No. 10744
  • Radios

    EX-NEXT Instruction Manual

    Radios Manager

    EX-NEXT Backup Manager Software
    This software is used to save the model data in the radio to the PC(Windows).

    EX-NEXT Updater, Update file Ver.3.00

    EX-NEXT Updater, Update file Ver.3.01