EX-NEXT Backup Manager Software

We released Backup Manager Software for EX-NEXT.

This software implements the following functions specifically for managing the model data registered in EX-NEXT.

1. Read EX-NEXT model data to PC, and save to PC
　By storing the data on your PC, you can keep your important data without deleting it, even if the data in the Expansion is full.

2. Extract the model data saved on the PC to the software and write it to EX-NEXT
　When the model data is expanded on the software, it can be easily viewed in a list view. This allows for easy editing, such as copying and pasting data or deleting unnecessary data.

Please refer included manual for how to use the software.

This software cannot be used with the existing LCD Xpansion Unit EXP-104/104S/104M.
If you are using EXP-104, please use "Xpansion Manager Software V2.12".

15th of Dec 2023 released Ver.1.01

　Backup_Manager_for_EX-NEXT_V1.01-Download.zip
*This version support for Firmware Ver.3.00.00
Please use this version when writing back the backup file after updating to Ver3.00.00.

8th of May 2021 released Ver.1.00

　Backup_Manager_for_EX-NEXT-Download.zip

Please download data by ZIP. And unzip data before using.
You can use software after unzip.

If you can not download data by the warning messages.
In this case, please select "continue" in your browser.

Required items for this software using​

You need to use a Personal computer(Windows 8.1,10). and the ICS-USB Adapter HS(No.61028).
Please use KO Driver2015  KO Driver2023 or later as the driver software to recognize the ICS-USB Adapter HS on your PC.

[notice]

This software does not guarantee data transmission. It may not be able to read or write data normally depending on the communication environment or data status. Please understand this in advance.