RSx3-12 H.C

No. 30129


[Specifications]

​#Torque: 7.5Kg-cm Speed: 0.13sec/60deg(@6.0V)

#Dimensions: 33×26×15mm (Mini size)
#Weight: 27.4g
#Operating voltage: 6.0V 
#The aluminum Top case
#The hard alumite aluminum gear (first gear made by plastic)
#Core-less motor
#Dual bearings
#The hard servo gear shaft
#Black cable
#Gold plated connector

#Recommended category
 1/12 Racing, GTcar, F1.

Made in Japan.

  • More precision and the installation rigidity are improved by the adoption of the aluminum top case,
    with only a very small difference in weight from normal RSx3-12.
    More linear steering can be felt.

    HCS Compatible.

    HCS (High speed Communcation System) is the new high speed communication system between the receiver to the servo. The HCS mode shortens communication time of the signal which is compressed. HCS compatible servos is changing mode automatically by signal from receiver. So HCS compatible servos can use with all receivers.  
    If you want to use servos by HCS, please use with HCS compatible receivers.

     

    Installed preset settings

    The following factory MODEL settings are pre-installed. 
    You can change setting by Servo model selector.

    Model1: Default setting(1/12 Stock class recommend)
    Model2: 2014 IFMAR setting (1/12 Modified class recommend,mild)
    Model3: 2015JMRCA Champion(1/12 Modified class recommend, Quick)
    Model4:  GT500, World GT, F-1 Rubber tyre class recommend
    Model5:  F1 form tyre, Asphalt road surface recommend

    *Model1 has been selected in factory setting.

     

    ICS Compatibe. 


    You can change servo's setting when you use our software" ICS Servo Manager".
    Ex, parameter of stretch. More retentivity in High grip condition, less retentivity in Low grip situation,
    You can select value by grip situation for best setting servos.

    Contents

    Servo x1
    Grommet x4
    Screw for Horm

  • Servo Manager

    ICS ServoManager Software Ver2.0.1.0
    This software can setting for RSx/BRx2/RSxone10/BSx2one10/RSx-12. Also you can use setting data from our.

    Dimensions Draw RSx3-12HC

    ICS

    About ICS(new version 10.2017)