Rx mode selector

No. 61031

Connecting this product to each channel of the HCS receiver can change the configuration of the mode setting and can confirm the mode being used.
RX mode selector is to change the modes of the HSC compatible receivers to either Normal or HCS.
Normal mode is for non-HCS compatible servos, HCS mode is for HCS compatible servos.

  • The HCS mode shortens the communication time of the signal which has been compressed.
    HCS is a communication method to largely improve linearity of the servo movement. When using HCS mode,corresponding servos（ex, RSx3/BSx3series）are required.


    *The corresponding servo recognizes both modes automatically.
    *Please do not connect a non-corresponding receiver or servo with HCS mode, or the servo might become damaged
    *The HCS receiver can have each individual channel (1-4) mode changed.

    Contents

    RX mode selector

  • KR-415FHD

    End of production
    No. 21009

    KR-415FHD Short Antenna

    End of production
    No. 21010

  • Receivers

    RX Mode selevtor Manual

    KR-418FH　Manual

  • Compatible for HCS! KR-415FHD