Drop Extension Unit 2.1

No. 10670


[Compatible models]

Master Unit EX-NEXT

*Also compatible with EX/2/RR/LDT/6/6R.  Set for the best performance in use with EX-NEXT radio.
*For use with EX-2/RR/LDT/6/6R, Xpansion firmware Ver. 2.12 or later is required.

  • Tune up for EX-NEXT

    Tuned for the evolution of the EX-NEXT to match the fastest feeling master unit as an exclusive use unit.

    Superior durability and operation feeling led by new angle sensor.

    Prevents deterioration of durability and operational feeling due to wear, which can be said to be the problem of contact sensors. Along with smooth operation feeling by smoother sliding, we realize high durability that is approximately 100 times compared with the prior sensor. Therefore, the best feeling of operation can be maintained for a long time. In addition, the new sensor outputs a more linear signal to the Master Unit. You can control the ESC and servo with a detailed operation sense. A realization of a sense of unity between people and cars.

    Increased the number of ball bearings that support the steering shaft for higher accuracy!

    The number of ball bearings supporting the steering shaft has been increased from one to two. The double-support type supports higher precision operation and reliability.

     

     

    The soft spring which can be operated with a constant tension.

    The normal spring included in the extension unit has been modified. The previous spring used was a progressive spring becoming stiffer as the wheel angle increased, but the new softer spring give a linear stiffness as the wheel angle increases. Since the spring tension can be adjusted, you can set the spring tension to your personal preference.

     

    Contents

    Drop extension Unit 2.2 x1