RSx3-one10 Ver.D Lite-R
#Torque: 8.2Kg-cm Speed: 0.08sec/60deg(@7.4V)
#Torque: 7.0Kg-cm Speed: 0.09sec/60deg(@6.0V)
#Dimensions: 40.5×26.5×21mm (Low Profile)
#Operating voltage: 6.0～7.4V (Lipo,Life,Ni-MH)
#Aluminum final Gear
#inside gear by brass (some by plastic)
#Dual ball bearings
#The aluminum heat sink middle case
#Gold plated connector
* This is not compatible for ICS function. Can not change setting, model memory add and change.
1/10 Electric Drift car
■It is specialized using for 2WD drift car by dedicated design.
RSx3-one10 Ver.D Lite-R is installed dedicated setting parameter that is specialized using for 2WD drift car after many testing.
You will be able to stable drift driving more easily.
RSx3-one10 Ver.D Lite-R has been finished as an adjustment that takes aggressive characteristics with RSx3-one10 Ver.D Lite, which has been well-received for its mild parameter settings according to drift.
This is mild parameter setting and it is less happen problem of vibration in case of using Gyro as same as RSx3-one 10 Ver.D.
Please see hear for informatin of RSx3-one10 Ver.D-lite.
Ver.D Lite-R is make a low price with it is while taking over good point from Ver.D by change to plastic top case and change servo wire.
Ver.D Lite-R have not function for change model memory as same as Ver.D Lite. but it will be demonstrated performance by setting is best for Drift car. It is less happen problem of vibration in case of using Gyro.
Its ability to faithfully utilize the assist effect of the popular gyro "KG-X" is equivalent to RSx3-one10 Ver.D.
*This is not comatibe for ICS function. Cannot change setting of parameter, and change model memory ,add model memory.
■It is good relationship with KG-X Gyro that is design for only Drift car.
Affinity is optimal of this with steering assist Gyro KG-X. Operation character is optimized for using together with KG-X.
* KG-X is not included this product.
Screw for Horn x1
ServosRSx3 / BSx3 Series Manual
ServoServo Fitting Chart
Fitting chart for various KO Servo.