Drift Set SG-1 [ RSx3-one10 Ver.D with KG-X ]
Drift set SG-1
■A great set of servo and gyro that is perfect for 2WD Drift!
This is included RSx3-one10 Ver.D servo best suited for 2WD Drift category, steering assist gyro KG-X, servo model selector.
■A dedicated design servo dedicated to the 2WD drift!
RSx 3-one 10 Ver. D which inherited the RSx-One 10 gene that has been active in a number of races is a dedicated design servo dedicated to the 2WD Drift car.
Equipped with an aluminum top case with stylish laser engraving and milling processing on the case size of a Low profile type ideal for 1/10 category. Inheriting the smooth and linear operation unique to RSx, it will be possible to achieve a dynamic drift with a high vehicle feeling. The problem of vibration which is likely to cause a problem when using a gyro with 2WD drift. RSx3-one10 Ver.D is solved this problem. Five types of data that match various road conditions and usage are already installed.
Please enjoy driving 2WD drift with RSx3-one10 Ver.D.
■Stylish racer engraving + top case of milling processing
Laser marking processing is done on 3 sides for the top case, 2 sides for the middle case. In addition, we have secured a sophisticated image with advanced milling cutting process. By making the alumite color chic black, you can install it without incongruity regardless of what type of drift chassis you install.
The middle case adopts accent milling processing for aluminum heat sink with excellent heat radiation efficiency, the gear adopts metal gear (some gear is resin gear).
■Prepare 5 different presets!
5 types of presets are registered in RSx3-one 10 Ver.D in advance. By switching with the servo model selector, it is possible to easily change to the setting that suits the car and the course. We cover all users from beginners to experts, and it is possible to set according to road conditions.
【Model3】 Standard (Selected）
KG-X is an intelligent steering assist gyro optimized for 2WD drift.
Next generation Gyro system, covering all required functions for Drift cars, such as AGC function, End point adjust (each L/R ) function, PCA function, etc.
AGS restrains vibration of servo!
With a conventional gyro system, servo vibrations occur when increasing gain setting.
The AGC function equipped with KG-X enables to stop the vibration and operate servo normally.
Independent setting for right and left!
KG-X enables settings of end point of servo independently for each side(L/R). This function is effective;
1), To limit the maximum movement angle of servo to protect linkage and knuckle etc. from damage.
2), To secure the same movement angles for the both end points.
Settings are to be kept memorized until next setting.
Feel steerage just as wanted!
PCA is the abbreviation of Priority Control Adjuster. The mixing ratios of the gyro signal and steering signal can be changed. Steering control performance can be obtained without feeling the use of the gyro.
Remote control of gain by 3ch. signal input
After connecting 3ch input port of KG-X to the port connect to 3ch (or 4ch) of the receiver, the Gyro gain can be changed by operating 3ch (or 4ch) of transmitter while driving a R/C car.
* Black connection cable (100mm) NO.36519 (Option) is required for the connection.
This is example for using KG-X.
HCS (High speed Communcation System) is the new high speed communication system between the receiver to the servo. The HCS mode shortens communication time of the signal which is compressed. HCS compatible servos are disigned to change its mode automatically according to a signal from receiver to operate with all KO receivers.
*KG-X initial setting is required when response mode is changed.
Aluminum case for Light weight and high stiffness with Cool design.
The outer case of KG-X is made of aluminum.
After Alumite processing, extra processing of milling and laser printing are applied to make the stylish design more attractive
RSx-one10 Ver.D x1
Servo Model Selector x1
ServosRSx3one10Ver.D Factory setting data