RSx3-one10 Ver.D
End of production
[Specifications]
#Torque: 8.2Kg-cm Speed: 0.08sec/60deg(@7.4V)
#Torque: 7.0Kg-cm Speed: 0.09sec/60deg(@6.0V)
#Dimensions: 40.5×26.5×21mm (Low Profile)
#Weight: 48.0g
#Operating voltage: 6.0～7.4V (Lipo,Life,Ni-MH)
#The hard alumite aluminum gear
#Core-less motor
#Dual ball bearings
#The hard servo gear shaft
#The aluminum top case
#The aluminum heat sink middle case
#Black cable
#Gold plated connector
#HCS Compatible
#Recommend category
1/10 EP on road DRIFT Car
-
■Dedicated design servo specialized for 2WD drift!
RSx 3-one10 Ver. D which inherited the RSx One 10 gene that has been active in a number of races is a dedicated design servo specialized for 2WD drift.
Equipped with an aluminum top case with stylish laser engraving and milling processing on the case size of a ropero type ideal for 1/10 category. We inherit the smooth and linear operation unique to RSx and anyone can easily drift. Vibration of Servo, which is easy to occur when using a gyro with 2WD drift, it will be not happen with RSx 3-one 10 VerD. Five types of data that match various road conditions and usage are already installed.
Please try experiencing drift control of high spec with RSx3-one10 Ver.D.
■Stylish Laser engraving + top case of milling processing
Laser marking processing is applied to 3 sides for the top case, 2 sides for the middle case. In addition, we have secured a sophisticated image with advanced milling cutting process. By making the alumite color chic black it can be mounted without incongruity even if it is mounted in various drift chassis.
Middle case uses aluminum heat sink with excellent heat radiation efficiency and milling process for design accent , gear adopts metal gear (However, only one piece is made of plastic.).
■Easy handling black servo lead
Commitment also extends to servo wire. The appearance and tightening black cable has the softness optimum for handling while securing the necessary current capacity. Compatibility with drift gyro gyro KG-X is outstanding.
■Compatible for H.C.S
HCS( High Speed Communication System) is the new high speed communication system between the receiver to the servo. The HCS mode shortens communication time of the signal which is compressed. HCS compatible servos are changing mode automatically by signal from receiver. So HCS compatible servos can use with all receivers.
If you want to use servos by HCS, please use with HCS compatible receivers.
The modes you can select on your servo depend on the transmitter and receiver you are using. Please refer to the table below.
■Installed preset settings
RSx3-one10 Ver.D is installed preset setting of 5 models. You can change each model by Servo model selector for fit to your car or track easily. It is useful for bigginer to expert drivers, evryoone can setting for situation of track.
Model1 Easiest: can most easy operation.
Model2 Easy: can easy operation.
Model3 Standard Setting( Selected)
Model4 Fast: Quick, need sensitive operation.
Model5 Expert: most quick, recommend to expert drivers.■Inherit the ICS system of RSx/BSx!
The RSx / BSx series active worldwide makes common ICS system available. Although the optimum parameters for normal running are set at the time of shipment, it is also possible to further refine each parameter by connecting it to the PC. Please download ICS Servo Manager from here.
*ICS USB adapter HS is required to connect with PC.
Contents
Servo x1
Grommet x4
Screw for Horn x1 -
Servos
RSx3 / BSx3 Series Manual
Servo Manager
ICS ServoManager Software Ver2.0.1.0
This software can setting for RSx/BRx2/RSxone10/BSx2one10/RSx-12. Also you can use setting data from our.Servos
RSx3one10Ver.D Factory setting data
Servo
Servo Fitting Chart
Fitting chart for various KO Servo.
