Servo Model Selector
RSx1/2/3, RSx1/3-one10, RSx1/2-12, BSx2, Bsx2/3-one10
* Can not be use with PDS series
The Servo Model Selector is a product that changes the model memory selection of KO PROPO RSx and BSx series servos easily.
#What is memory of servos.
RSx, Bsx series(except Bsx Standard). Thease servos can memorize settings of each parameter in a servo.
You can change models of servos.
#About the specification of the main unit
Connect wire of Servo moel selector to Receiver.( or Battery) and connect servo to this Unit. You will know the model number memory by the number of flashes from the LED.
The number of flashes of the LED are changed by pushing the button of the unit.
Current model number is the pattern of flashes of the LED.
Factory setting of each servos are diffrent. Now(May 2016), No.1 to No.5 memories are same parameter.
But BSx2 one10 Grasper has 2 diffrent model in memories.
Model1 is High spec setting for expert racing. Model2 is more mild setting for drivers. Factory default setthing is model2.
If you use Servo model selector, you can change models of servos easily.
And you can download some servo setting from our site. Ex RSx12 are 5 setthings in our site.
Please see support tab in on eath products page.
#Logo sticker in this package.
■Because the product has exposed components, please pay attention to the short circuit of the product from metal and other conductive materials.
■Servo operation will become abnormal when you mistake the procedure of the connection.
■If LED is fast blinking again after fast blinking when powered ON, it is a sign of communication error. Please turn of the power and check servo wire connections.
■Please use the voltage with a power source of 6~7.4v.
■This unit can not be use when you drive a car. Please remove after settings are done.
■When there is a strange smell or hot temperature, please stop using and turn off power.
Servo model Selector x1
Servo ManagerICS ServoManager Software Ver22.214.171.124
This software can setting for RSx/BRx2/RSxone10/BSx2one10/RSx-12. Also you can use setting data from our.
ICSAbout ICS(new version 10.2017)