Xpansion Unit EXP-104S

No. 10580

Ver2.1 Softwere
 

[Compatible Models]

EX-RR/EX-2/EX-6

  • Update software V2.1

    Xpansion software are update and add new function.

    Break-in function is added.

    THROTTLE >BRK-IN

    This function is useful at break-in which many EP car drivers do for diff-oil maintenance and after ball diff assembly.
    You are able to fix the throttle to Low by setting a time limit before driving. This is a function to minimize the feeling change of the cornering characteristics due to the temperature change of the differential before a run.
    Not only the operating time can be changed but also the throttle input can be adjusted to your preferred speed. In addition, the break-in function starts with an assigned ET/BT key and the buzzer of the EX-RR sounds during operation so you can see immediately that the break-in function is activated. Also, in case of an emergency we have also equipped the function to stop in case of an emergency by operating the key again.

     

    Hand break function is added.

    THROTTLE > H-BRK

    In a real drift car, there is a method of pulling the hand brake while keeping the accelerator ON to make a better chance of a drift.
     
    We added a hand brake function that will allow us to use this technique that is very similar. Like an actual vehicle, even if you operate the throttle trigger the set amount of brake will be applied only while operating the assigned ET/BT key as long as the throttle trigger is operated. In addition to drift cars, this can be used for regular RC cars to create an understeer feeling.

     

    Other updates to  functions in XpansionV2.10

    #Added alert and changed operating procedure in the ALL REST function.
    #Display of 3CH/4CH positions is changed to display a Value (ex. NOW:+100)
    #Added changeable value in the Gyro mode of 3CH/4CH
    #Steering direct function is changed so that it can be stopped by adding to Steering > Travel menu.
    #Other small bugs fixed

     

    The evolved software

    Calculator has rollout calculation.

    FUNCTION>SYSTEM>CALC

    This new function has been added to the calculator in the EX-2. Put TYRE DIAMETER in the calculator, ROLLOUT( Car movement distant per one motor rotation ) is automatically calculated. This is useful for changing gearing in a DD car.

     

     

     

     

     

     

    New Push Control Function for Direct drive car.

    THROTTLE>PUSH

    A motor that has a strong magnetic force will add a braking effect when the throttle is released and will make a car stall in the corner. Setting the amount of forward input to remain on the throttle as the trigger returns to neutral can be adjusted. This is effective for F1, WorldGT and 1/12 category of cars whose gear ratio is small.

     

     

     

     

     

    English⇔Japanese language change is possible in the menu.

    FUNCTION>SYSTEM>CONFIG

    You can change language in the display from Japanese and English. Selecting the display language that you prefer to use.

     

     

     

     

     

     

     

    Adding various performance functions such as down timer and more.

    #Individual response settings for the steering and throttle.( Feel setting menu)
    #Display RF mode (FH-G/ FH-F /MzMHS G/MzMHS F)
    #2 way setting point in the Steering Speed.
    #3 way Setting point in the Throttle Speed.
    #Full acceleration settings.
    #Full ABS Settings.
    #Balance L/R added in the Steering override.
    #Add User timer.
    #35 model memory.

    *This photo is screen of Down Timer

     

     

    Function Summary

    <Model>
    Model Select / Model Name / Model Copy / Model Reset / All Reset

    <System>
    Display / Battery / Calculator / Sound / VR Information / Config / Key Speed / Menu Speed / Language / Operation time / User timer

    <Steering>
    Steering Travel / Steering Balance / Steering Trim/Steering Sub Trim / Steering Trim rate / Steering Speed Turn(2way) / Steering Speed return (2way) / Steering Curve / Steering Punch / Steering Feel / Steering Response / Steering Auto Trim / Steering Auto Balance /Steering Reverse

    <Throttle>
    Throttle travel F / Throttle travel B / Throttle Trim/Throttle Sub Trim / Throttle Trim rate / Throttle Speed Turn(3way) / Throttle Speed reTurn(3way) / Throttle Curve / Throttle Punch / Throttle Feel / Throttle Response / Push Control/ ACCEL / ABS / Auto Start / Idle Up / Neutral Brake / Throttle Override / Throttle Reverse/Break-in/Hand-brake

     

    <3ch/4ch>
    KEY Setting / 2WAY / 3WAY / 5WAY / ANALOG / Gyro / Twin Servo / 4WS/AMP Mixing / Throttle Mixing / Trim Set

    <Timer>
    Timer Start / Trigger Start / Lap history / Start Stop Key / Lap Key / Lap Navi / Alarm time / Pre Alarm / Alarm Mode / Timer Mode (Lap Timer/Down Timer)

    Contents

    Xpansion unit x1

  • Master Unit EX-2


    No. 80557
  • Radios

    EX-RR/2(XpansionVer2.12)Instruction Manual

    Radios Manager

    EX-2/RR Xpansion Updata V2.12

    Xpansion Manager Software V2.12

  • Introduce for Xpansion ICS Manager V2.12
    Procedure of update Xpansion to V2.12