KOPROPO's "NEXT” Stage

 

The Long-Awaited MINI-Z Set

This transmitter/receiver set includes the MINI-Z EVO Receiver Unit EX-NEXT MC-8, which can be used with the MINI-Z EVO. The evolved EX-NEXT's high-speed response can be used with the MINI-Z EVO.

 

 

Firmware Ver.2.00 compatible with MINI-Z

Firmware Ver.2.00 is released to use MINI-Z EVO with EX-NEXT. This set of EX-NEXT is preset with Ver.2.00.

If you already have EX-NEXT

If you already have EX-NEXT, you can update it to Ver. 2.00 to make it compatible with MINI-Z EVO. Please download the software and files necessary for uploading from the following links.  *The ICS USB Adapter HS is required for the update.

"EX-NEXT Updater, Update file"
 

 

Equipped with a new standard "XT" that achieves the fastest communication speed in the industry​.

You can choose and use "XT advanced mode" which is the world record response for one-way communication and "XT telemetry mode" which is compatible with Telemetry ( 2 ways communication).

In addition, starting with Update Ver. 2.00, a new "MINI-Z Mode" has been implemented to support MINI-Z.

 

MINI-Z Mode

EX-NEXT was newly developed by reviewing the design of the control and communication systems from the ground up. It achieves the industry's fastest communication speed and high resolution. In MINI-Z Mode, it outperforms FHSS such as the EX-RR, which has been the fastest. The EX-NEXT's high-speed communication increases the density of information that can be transmitted to the machine. You can experience the "fine and smooth control feeling" brought about by unprecedented high-definition, high-resolution control.

*MINI-Z mode does not support the Telemetry function.

 

XT Advanced Mode, XT Telemetry Mode

This product is not only for MINI-Z. When combined with the KR-420XT receiver can also be used with general-purpose RC cars without the need to change the firmware. The combination of the ultra-fast XT Advanced Mode, the bi-directional XT Telemetry Mode, and the serial servo 4S allows you to experience the dramatic evolution of high-speed performance from FHSS. For details, please refer to the product page of the set with KR-420XT.

EX-NEXT LDT w/KR-420XT
EX-NEXT LDT w/ KR-420XT Double receiver
EX-NEXT LDT w/KR-420XT(Short)
EX-NEXT LDT w/KR-420XT(short) Double receiver

 

 

Please note: Switching the RF mode

You can switch between XT Advanced Mode, XT Telemetry Mode, and MINI-Z Mode by setting the RF Mode in EX-NEXT. (Set the RF mode to "MINI-Z Mode" when using the MINI-Z.) Also, the default setting is "XT telemetry mode", so if you want to use it in MINI-Z Mode, please change it to "MINI-Z Mode" first.

RF mode can be set for each model memory to be able to use on a variety of machines. When adding a new model memory, please be sure to set the RF mode first. For details on how to set the RF mode, please refer to the "EX-NEXT Instruction Manual".
When the RF mode is set to "MINI-Z Mode", the LED on the EX-NEXT unit repeats "blue -> light blue -> blue -> light blue" alternately, so please check it.

 

 

Adjust the Gyro sensitivity at the Transmitter

The EX-NEXT allows you to adjust the sensitivity of the gyro installed in the MINI-Z from the transmitter at hand. The sensitivity can be adjusted using the 3CH/4CH "GYRO" function. The sensitivity can be easily adjusted from the control console without connecting the machine to a PC, allowing fine adjustments while running the machine.

 

 

Intuitive alert function with vibration and full-color LED

Equipped with a vibration motor that has been requested. This can be used for alarms that notify the running time and alerts for various sensors. In addition, the LED on the front of the master unit is a full-color LED. The radio wave mode in use and the alert content of the vibration motor can now be identified by the LED lighting pattern.

 

 

New idea! Equipped with Lay Down Trigger!​

A new idea is to lay down the operation axis of the trigger by 90 degrees. This sensation that you can squeeze and press naturally with your fingertips. Ergonomic design that does not disturb the movement of the fingers realizes a seamless and highly linear operation feeling over the entire stroke. Makes accelerator work and braking smoother and more enjoyable. "LDT" is born, which seems to improve Dora Tech for both one and two ranks. This appearance, which is also focused on the quality of operation feeling, takes you to a new dimension. Also, this is adjustable for use by children who has small hands.  * There are limits by Hand size.

For more information on "LDT", please visit here.

Charge the battery by connecting it to stand

A balance terminal extension cable is included. You can charge the battery without removing the battery from the transmitter.
*This compatible connector is XH (3 pins). * Compatible Battery size (Maximum):88x18x32cm

 

 

 

 

 

New Drop Extension Unit 2.1

Tune up for EX-NEXT

Tuned for the evolution of the EX-NEXT to match the fastest-feeling master unit as an exclusive-use unit.

Superior durability and operation feeling led by new angle sensor.

Prevents deterioration of durability and operational feeling due to wear, which can be said to be the problem of contact sensors. Along with smooth operation feeling by smoother sliding, we realize high durability that is approximately 100 times compared with the prior sensor. Therefore, the best feeling of operation can be maintained for a long time. In addition, the new sensor outputs a more linear signal to the Master Unit. You can control the ESC and servo with a detailed operation sense. A realization of a sense of unity between people and cars.

Increased the number of ball bearings that support the steering shaft for higher accuracy!

The number of ball bearings supporting the steering shaft has been increased from one to two. The double-support type supports higher precision operation and reliability.

 

 

The soft spring can be operated with constant tension.

The normal spring included in the extension unit has been modified. The previous spring used was a progressive spring becoming stiffer as the wheel angle increased, but the new softer spring gives a linear stiffness as the wheel angle increases. Since the spring tension can be adjusted, you can set the spring tension to your personal preference.

 

 

Firmware update function.​

The firmware update function is supported with the use of the ICS USB Adapter HS.
Please refer below pages for updated information.
EX-NEXT Updater, Update file

*Window PC and ICS USB adapter HS are necessary for an update.
*Firmware for EX-NEXT can only be used for this product.  It cannot be used with EX-RR/LDT/2/6/6R.

 

 

EX-NEXT function list

<Telemetry>
RF mode/Response/REAL TIME ICS/Battery fail safe

<MODEL>
Model Select /Model name/ Model copy /Model reset /50 model

<System>
Display / Battery / Calculator / Sound/ VR information / Setting /Key speed /Menu speed /Display language / Operation timer /User timer / All reset

<Steering>
Travel/ Balance / Trim /Sub Trim / Trim rate / Speed turn(2way) / Speed return(2way) / Curve / Punch / Feel / Response / Steering Auto Trim /Steering Auto balance/Reverse

<Throttle>Travel F / Travel B / Trim /Sub trim / Trim rate / Speed turn(3way) / Speed return(3way) / Curve / Punch / Feel / Response / Push control / Acceleration / ABS /Auto Start / Idle up / Neutral brake / Override / Reverse / Brake in / Hand brake

<3ch/4ch>
Key setting/ 2WAY / 3WAY / 5WAY / Analog/ Gyro / Twin servo / 4WS/AMP mixing
 /Throttle mixing / Trim set 

<5ch-8ch>
Key setting/ 2WAY / 3WAY / 5WAY / Analog

<Timer>
Timer Start / Trigger start / Lap history / Start-stop key/Lap key /Lap Navi / Alarm time/ Pre-alarm / Alarm mode / Timer mode (Lap timer/ Down timer)

 

* MINI-Z is a product and registered trademark of KYOSHO CORPORATION.

Contents:

Master Unit EX-NEXT　×1
LCD Xpansion Unit2 EXP-201　×1
Aluminum Steering Wheel5　x1
Drop extension Unit 2.1　×1
Expert grip unit LDT(white) ×1

Receiver: MINI-Z EVO Receiver Unit EX-NEXT MC-8　×3

Other: Throttle Lever(wide)/Trigger Pad/Brake spacer/Balance terminal extension cable

*Battery, Dry batteries are sold separately