EX-NEXT w/MINI-Z EVO Double Receiver BT Stand Set
<Includes battery stand (white version)>
<Includes Serial compatible receiverKR-420XT>
●Dimensions:240.5×163.0×107.2mm（Does not include protrusions）
●Weight: 551g（battery not included ）
●Power supply: AAA size dry battery, Ni-MH battery x4 (sold separately)
Li-Fe battery（2cell 6.6V）(sold separately)
Li-Po battery（2cell 7.4V）(sold separately)
●Current: 200mA or less
●Channel：PWM 4ch/ Serial 8ID
*Maximum setting ID number of serial are different by each product.
●Radio Mode: XT
●Model memory 50
●Compatible receiver: KR-420XT / "MINI-Z EVO Receiver Unit EX-NEXT MC-8"
*EX-NEXT "MINI-Z Mode" and "MINI-Z EVO Receiver Unit EX-NEXT MC-8" do not support the telemetry function.
*The conventional "MINI-Z EVO Receiver Unit 82040" is not compatible with this product.
*This product’s manual is not included in the package, please download from here.
*Can not use LCD Xpansion unit EXP-104 series.
*Can not use FHSS or DSSS receiver. (KR-418FH KR-415FHD,KR-210S etc)
*The product photos on this site are prototypes, which may be different to production models.
Includes Battery Stand Unit in white version
This set comes standard with a battery stand unit painted in the same pearl white as the EX-NEXT, allowing the batteries to be mounted on the radio without compromising the EX-NEXT's distinctive appearance.
*Not included Battery and Charger.
Please refer to this page for battery sizes that can be installed.
MINI-Z Double receiver set
This transmitter/receiver set includes the MINI-Z EVO Receiver Unit EX-NEXT MC-8, which can be used with the MINI-Z EVO. The evolved EX-NEXT's high-speed response can be used with the MINI-Z EVO.
Firmware Ver.2.00 compatible with MINI-Z
Firmware Ver.2.00 is released to use MINI-Z EVO with EX-NEXT. This set of EX-NEXT is preset with Ver.2.00.
If you already have EX-NEXT
If you already have EX-NEXT, you can update it to Ver. 2.00 to make it compatible with MINI-Z EVO. Please download the software and files necessary for uploading from the following links. *The ICS USB Adapter HS is required for the update.
Equipped with a new standard "XT" that achieves the fastest communication speed in the industry.
In addition, starting with Update Ver. 2.00, a new "MINI-Z Mode" has been implemented to support MINI-Z.
EX-NEXT was newly developed by reviewing the design of the control and communication systems from the ground up. It achieves the industry's fastest communication speed and high resolution. In MINI-Z Mode, it outperforms FHSS such as the EX-RR, which has been the fastest. The EX-NEXT's high-speed communication increases the density of information that can be transmitted to the machine. You can experience the "fine and smooth control feeling" brought about by unprecedented high-definition, high-resolution control.
*MINI-Z mode does not support the Telemetry function.
XT Advanced Mode, XT Telemetry Mode
This product is not only for MINI-Z. When combined with the KR-420XT receiver can also be used with general-purpose RC cars without the need to change the firmware. The combination of the ultra-fast XT Advanced Mode, the bi-directional XT Telemetry Mode, and the serial servo 4S allows you to experience the dramatic evolution of high-speed performance from FHSS. For details, please refer to the product page of the set with KR-420XT.
Please note: Switching the RF mode
You can switch between XT Advanced Mode, XT Telemetry Mode, and MINI-Z Mode by setting the RF Mode in EX-NEXT. (Set the RF mode to "MINI-Z Mode" when using the MINI-Z.) Also, the default setting is "XT telemetry mode", so if you want to use it in MINI-Z Mode, please change it to "MINI-Z Mode" first.
RF mode can be set for each model memory in order to be able to use it on a variety of machines. When adding a new model memory, please be sure to set the RF mode first. For details on how to set the RF mode, please refer to the "EX-NEXT Instruction Manual".
When the RF mode is set to "MINI-Z Mode", the LED on the EX-NEXT unit repeats "blue -> light blue -> blue -> light blue" alternately, so please check it.
Adjust the Gyro sensitivity at the Transmitter
The EX-NEXT allows you to adjust the sensitivity of the gyro installed in the MINI-Z from the transmitter at hand. The sensitivity can be adjusted using the 3CH/4CH "GYRO" function. The sensitivity can be easily adjusted from the control console without connecting the machine to a PC, allowing fine adjustments while running the machine.
Intuitive alert function with vibration and full-color LED
Equipped with a vibration motor that has been requested. This can be used for alarms that notify the running time and alerts for various sensors. In addition, the LED on the front of the master unit is a full-color LED. The radio wave mode in use and the alert content of the vibration motor can now be identified by the LED lighting pattern.
Can be replaced with the Color Grip2 of your choice.
The "Color Grip2" already on sale can be attached. Choose your favorite color from a wide range of variations.
New Drop Extension Unit 2.1
Tune up for EX-NEXT
Tuned for the evolution of the EX-NEXT to match the fastest feeling master unit as an exclusive use unit.
Superior durability and operation feeling led by new angle sensor.
Prevents deterioration of durability and operational feeling due to wear, which can be said to be the problem of contact sensors. Along with smooth operation feeling by smoother sliding, we realize high durability that is approximately 100 times compared with the prior sensor. Therefore, the best feeling of operation can be maintained for a long time. In addition, the new sensor outputs a more linear signal to the Master Unit. You can control the ESC and servo with a detailed operation sense. A realization of a sense of unity between people and cars.
Increased the number of ball bearings that support the steering shaft for higher accuracy!
The soft spring which can be operated with a constant tension.
The normal spring included in the extension unit has been modified. The previous spring used was a progressive spring becoming stiffer as the wheel angle increased, but the new softer spring give a linear stiffness as the wheel angle increases. Since the spring tension can be adjusted, you can set the spring tension to your personal preference.
Firmware update function.
*Window PC and ICS USB adapter HS are necessary for update.
*Firmware for EX-NEXT can only be used for this product. It cannot be used with EX-RR/LDT/2/6/6R.
EX-NEXT function list
RF mode/Response/REAL TIME ICS/Battery fail safe
Model select /Model name/ Model copy /Model reset /50 model
Display / Battery / Calculator / Sound/ VR information / Setting /Key speed /Menu speed /Display language / Operation timer /User timer / All reset
Travel/ Balance / Trim /Sub Trim / Trim rate / Speed turn(2way) / Speed return(2way) / Curve / Punch / Feel / Response / Steering Auto Trim /Steering Auto balance/Reverse
<Throttle>Travel F / Travel B / Trim /Sub trim / Trim rate / Speed turn(3way) / Speed return(3way) / Curve / Punch / Feel / Response / Push control / Acceleration / ABS /Auto Start / Idle up / Neutral brake / Override / Reverse / Brake in / Hand brake
Key setting/ 2WAY / 3WAY / 5WAY / Analog/ Gyro / Twin servo / 4WS/AMP mixing
/Throttle mixing / Trim set
Key setting/ 2WAY / 3WAY / 5WAY / Analog
Timer Start / Trigger start / Lap history / Start stop key/Lap key /Lap Navi / Alarm time/ Pre alarm / Alarm mode / Timer mode (Lap timer/ Down timer)
* MINI-Z is a product and registered trademark of KYOSHO CORPORATION.
Master Unit EX-NEXT ×1
LCD Xpansion Unit2 EXP-201 ×1
Aluminum Steering Wheel5 x1
Drop down extension Unit 2.1 ×1
Expert grip unit 2(White Version) ×1
Battery Stand Unit (White Version) x1
Battery box (for AAA Dry batteries) x1
*Normal stand unit is not included.
Receiver: "MINI-Z EVO Receiver Unit EX-NEXT MC-8" ×2
*Battery, Charger, Dry batteries are sold separately