BSx2-Response

No. 30203
End of production

[Specifications]

<Speed type servo>
#Torque:18.1Kg-cm Speed:0.08sec/60deg(@7.4V)
#Torque:15.4Kg-cm Speed:0.09sec/60deg(@6.0V)

#Dimensions: 41x37.5x20mm (Standard size)
#Weight: 62.4g
#Operating voltage: 6.0 to 7.4V (Lipo,Life,Ni-MH)
#The hard alumite aluminum gear
#Brush-less motor
#Dual bearings
#The hard servo gear shaft
#The aluminum heat sink middle case
#Gold plated connecter

#Recommend category
 1/8 Off road, 1/8 On road ,1/10 EP off road.   
    *Please use for steering control.

Made in Japan.

  • Features

    Current servos have the appearance of high speed and high power from the response of 2.4GHz and the power from Li-po batteries respectively. This creates a huge demand upon the servo. The BSx2 is the Blushless servo with the durability and operability to employ this high-spec demand.

    1:Case

    The middle case is machined from one piece of aluminum that incorporates the gear pins and motor being held properly in place. The top case rigidity has been improved with the addition of two screws in the middle to prevent flex and keep the gears properly aligned. The upper Hard Case (H.C) is also machined from aluminum. H.C is the distinction of durability for categories that demand high stress.

    2:Blushless Motor

    A servo motor is a very important part of a servo. The specification of a servo is up to the motor being used. We have developed a new Brushless motor suitable for the new R/C standard with numerous performance and stress tests.

    3:Gear

    The gears are made with a special Japanese aluminum. This gear is 45% lighter than brass and has the same hardness as steel. The ‘Light Weight’ design provides a clean response for driving and reduces the burden on the servo motor. The thorough quality control of the manufactured gears ensures the least amount of backlash possible for smooth action. And Power and Pawer HC use Special Stainless Gear. It is very strong and useful for off load category.

    ICS

     You can change servo's setting when you use our software" ICS Servo Manager".
    Ex, parameter of stretch. More retentivity in High grip condition, less retentivity in Low grip situation,
    You can select value by grip situation for best setting servos.

     

     

    ---Note---

    The servo is powered on there may be a slight glitch, this is normal (situation).
    We recommend this servo use for steering control.

    Contents

    Servo x1

    Rubber Grommet x4

    Screw for horn x1

  • BSx2-Response HC

    End of production
    No. 30201

    BSx2-Power HC

    End of production
    No. 30202

    BSx2-Power


    No. 30204

    ICS-USB Adapter HS


    No. 61028
  • Servos

    BSx2 Manual

    KO Driver

    KO Driver 2015

    Servo Manager

    ICS ServoManager Software Ver2.0.1.0
    This software can setting for RSx/BRx2/RSxone10/BSx2one10/RSx-12. Also you can use setting data from our.

    Servos

    BSx2/ 3 Servos Factory setting data(for ICS Servo Manager2.0)
    This is factory setting data which can use by Servo Manager2.0.

  • About ServoModelSelector
    How to install KO Driver 2015 to Windows10