Master Unit EX-NEXT Upgrade set w/MINI-Z EVO Receiver Unit
●Power supply: AAA size dry battery, Ní-MH battery x4 (sold separately)
Li-Fe battery（2cell 6.6V）(sold separately)
Li-Po battery（2cell 7.4V）(sold separately)
●Current: 200mA or less
●Channel：PWM 4ch/ Serial 8ID
*Maximum setting ID number of serial are different by each products.
●Radio Mode: XT
●Model memory 50
＊Model data is stored in the Master Unit.
・Drop extension unit 2.1(recommend)
・Drop extension unit 2
・Expert Grip Unit2(right)
・Expert Grip Unit LDT
●Compatible receiver: KR-420XT, " MINI-Z EVO Receiver Unit EX-NEXT MC-8"
*EX-NEXT "MINI-Z Mode" and "MINI-Z EVO Receiver Unit EX-NEXT MC-8" do not support the telemetry function.
*The conventional "MINI-Z EVO Receiver Unit 82040" is not compatible with this product.
*This product’s manual is not included in the package, please download from here.
*Can not use LCD Xpansion unit EXP-104 series.
*Can not use FHSS or DSSS receiver. (KR-418FH KR-415FHD,KR-210S etc)
*The product photos on this site are prototypes, which may be different to production models.
Good value upgrade set for KIY customer who using EX-RR, LDT, etc.
If you already have a KIY CONCEPT radio, you can upgrade to the latest EX-NEXT by replacing it with the master unit, LCD expansion, and receiver of this set. You can use the latest operation performance at the minimum cost without wasting your unit.
What is KIY Concept.
KIY (Kustomize it Yourself) CONCEPT, which consists of a detachable unit that can be attached and detached in one touch without tools, creates a new driving style. You can freely combine it with each unit and operate it in your own style.
Products that can be combined
Drop Extension Unit2.1 NEW
Drop Extension Unit2
Drop Extension Unit（Soft Spring included）
Drop Extension Unit
3D Extension Unit for KIY
ST Unit Stick Type for KIY
Steering Unit EX-1
Expert Grip Unit LDT
Expert Grip Unit2(right)
MINI-Z compatible receiver unit included
This transmitter/receiver set includes the MINI-Z EVO Receiver Unit EX-NEXT MC-8, which can be used with the MINI-Z EVO. The evolved EX-NEXT's high-speed response can be used with the MINI-Z EVO.
Antenna less, lightweight, compact Master unit.
The weight of the master unit has been reduced to the utmost limit. Achieves both optimal weight balance and usability. Furthermore, by making the antenna short and compact, outstanding maneuverability has been achieved. Furthermore, the LCD unit can be installed by rotating it 90 ° according to the driver's preference.
Equipped with a new standard "XT" that achieves the fastest communication speed in the industry.
In addition, starting with Update Ver. 2.00, a new "MINI-Z Mode" has been implemented to support MINI-Z.
EX-NEXT was newly developed by reviewing the design of the control and communication systems from the ground up. It achieves the industry's fastest communication speed and high resolution. In MINI-Z Mode, it outperforms FHSS such as the EX-RR, which has been the fastest. The EX-NEXT's high-speed communication increases the density of information that can be transmitted to the machine. You can experience the "fine and smooth control feeling" brought about by unprecedented high-definition, high-resolution control.
*MINI-Z mode does not support the Telemetry function.
XT Advanced Mode, XT Telemetry Mode
This product is not only for MINI-Z. When combined with the KR-420XT receiver can also be used with general-purpose RC cars without the need to change the firmware. The combination of the ultra-fast XT Advanced Mode, the bi-directional XT Telemetry Mode, and the serial servo 4S allows you to experience the dramatic evolution of high-speed performance from FHSS. For details, please refer to the product page of the set with KR-420XT.
Please note: Switching the RF mode
You can switch between XT Advanced Mode, XT Telemetry Mode, and MINI-Z Mode by setting the RF Mode in EX-NEXT. (Set the RF mode to "MINI-Z Mode" when using the MINI-Z.) Also, the default setting is "XT telemetry mode", so if you want to use it in MINI-Z Mode, please change it to "MINI-Z Mode" first.
RF mode can be set for each model memory in order to be able to use it on a variety of machines. When adding a new model memory, please be sure to set the RF mode first. For details on how to set the RF mode, please refer to the "EX-NEXT Instruction Manual".
When the RF mode is set to "MINI-Z Mode", the LED on the EX-NEXT unit repeats "blue -> light blue -> blue -> light blue" alternately, so please check it.
Master Unit EX-NEXT x1
LCD Xpansion Unit 2 EXP-201 x1
Receiver: MINI-Z EVO Receiver Unit EX-NEXT MC-8 x1
RadiosEX-NEXT Instruction Manual
Radios ManagerEX-NEXT Backup Manager Software
This software is used to save the model data in the radio to the PC(Windows).
Released EX-NEXT latest update file.