RSx2-Power

No. 30109
End of production

[Specifications]

<Torque type servo>
#Torque:31.6Kg-cm Speed: 0.11sec/60deg (@7.4V)
#Torque:26.3Kg-cm Speed: 0.13sec/60deg (@6.0V)

#Dimensions: 41x38x20mm(Standard size)
#Weight: 65.5g
#Operating voltage: 6.0 to 7.4V(Lipo,Life,Ni-MH)
#The hard alumite aluminum gear
#Core-less motor
#Dual bearings
#The hard servo gear shaft
#The aluminum heat sink middle case
#Gold plated connector

#Recommend category
 1/8 Off road, 1/8 On road, 1/10 EP Off road.

Made in Japan.

  • Features

    Current servos have the appearance of high speed and high power from the response of 2.4GHz and the power from Li-po batteries respectively. This creates a huge demand upon the servo. The RSx is the racing servo with the durability and operability to employ this high-spec demand.

    1:Case

    The middle case is machined from one piece of aluminum that incorporates the gear pins and motor being held properly in place. The top case rigidity has been improved with the addition of two screws in the middle to prevent flex and keep the gears properly aligned. The upper Hard Case (H.C) is also machined from aluminum. H.C is the distinction of durability for categories that demand high stress.

    2:Motor

    A servo motor is a very important part of a servo. The specification of a servo is up to the motor being used. We have developed a new motor suitable for the new R/C standard with numerous performance and stress tests.

    3:Gear

    The gears are made with a special Japanese aluminum. This gear is 45% lighter than brass and has the same hardness as steel. The ‘Light Weight’ design provides a clean response for driving and reduces the burden on the servo motor. The thorough quality control of the manufactured gears ensures the least amount of backlash possible for smooth action. And Power and Pawer HC use Special Stainless Gear. It is very strong and useful for off load category.

    ICS

     You can change servo's setting when you use our software" ICS Servo Manager".
    Ex, parameter of stretch. More retentivity in High grip condition, less retentivity in Low grip situation,
    You can select value by grip situation for best setting servos.

    Contents

    Servo x1
    Grommet x4
    Screw for Horn x1

  • RSx2-Response H.C


    No. 30106

    RSx2-Power H.C

    End of production
    No. 30107

    RSx2-Response

    End of production
    No. 30108

    Aluminum Gear Set For RSx Power / HC

    End of production
    No. 35540

    ICS-USB Adapter HS


    No. 61028
  • Servos

    RSx / RSx2 Manual

    KO Driver

    KO Driver 2015

    Servo Manager

    ICS ServoManager Software Ver2.0.1.0
    This software can setting for RSx/BRx2/RSxone10/BSx2one10/RSx-12. Also you can use setting data from our.

    Servos

    RSx RSx2 Factory setting data(for ICS Servo Manager2.0)
    This is factory setting data which can use by Servo Manager2.0.

    Dimensions draw RSx/RSx2/BSx2 Plastic top case

  • 2016 European Championship
    About ServoModelSelector
    How to install KO Driver 2015 to Windows10