RSx-one10
End of production
[Specifications]
#Torque: 12.0Kg-cm Speed: 0.09sec/60deg(@7.4V)
#Torque: 10.0Kg-cm Speed: 0.10sec/60deg(@6.0V)
#Dimensions: 41×25.5×21mm (Low Profile)
#Weight: 51.0g
#Oprating voltage: 6.0 to 7.4V (Lipo,Life,Ni-MH)
#The hard alumite aluminum gear
#Core-less motor
#Dual bearings
#The hard servo gear shaft
#The aluminum heat sink middle case
#Gold plated connector
#Recommend category
1/10EP On road, 1/10 GP On road, 1/10 EP Off road.
Made in Japan.
-
Case & Gear
Through repeatedly testing prototype samples for precision and durability, the most suitable specs for low-profile RC servos have been realized.
Made in Japan
The RSxOne10 series: all essential parts such as the case, the gear, the motor are made in Japan.
At the domestic factory the close inspections are executed through the delivery to secure “Thorough Made in Japan” product reliability.New software for servo.
The RSx One10 software specially designed for the maximum performance has been developed.
While corresponding to the speeding up response of high-end radios, the product secures the receptivity of the axis.
RSx implements more advanced software.Try to mount the RSx servo in your cars and feel a new driving sense by all means!
ICS
You can change servo's setting when you use our software "ICS Servo Manager".
Ex, parameter of stretch. More retentivity in High grip condition, less retentivity in Low grip situation,
You can select value by grip situation for best setting servos.Contents
Servo x1
Grommet x4
Screw foe horn x1 -
Servos
RSx / RSx2 Manual
KO Driver
KO Driver 2015
Servos
RSx RSx2 Factory setting data(for ICS Servo Manager2.0)
This is factory setting data which can use by Servo Manager2.0.
Dimensions draw RSx-one10/RSx-one10 Response/RSx3-one10 Response
-
About ServoModelSelector
How to install KO Driver 2015 to Windows10
