End of production
<Speed type servo>
#Torque: 9.0Kg-cm Speed: 0.07sec/60deg(@7.4V)
#Torque: 7.0Kg-cm Speed: 0.09sec/60deg(@6.0V)
#Dimensions: 41×25.5×21mm (Low Profile)
#Oprating voltage: 6.0 to 7.4V (Lipo,Life,Ni-MH)
#The hard alumite aluminum gear
#Hard servo gear shaft
#The aluminum heat sink middle case
#Gold plated connector
1/10 EP On road, 1/10 GP On road, 1/10 EP Off road.
*Please use to steering control.
Made in Japan.
Case & Gear
Through repeatedly testing prototype samples for precision and durability, the most suitable specs for low-profile RC servos have been realized.
Made in Japan
The RSxOne10 series: all essential parts such as the case, the gear, the motor are made in Japan.
At the domestic factorythe close inspections are executed through the delivery to secure “Thorough Made in Japan” product reliability.
New software for servo.
The RSx One10 software specially designed for the maximum performance has been developed.
While corresponding to the speeding up response of high-end radios, the product secures the receptivity of the axis.
RSx implements more advanced software.
Try to mount the RSx servo in your cars and feel a new driving sense by all means!
You can change servo's setting when you use our software "ICS Servo Manager".
Ex, parameter of stretch. More retentivity in High grip condition, less retentivity in Low grip situation,
You can select value by grip situation for best setting servos.
The servo is powered on there may be a slight glitch, this is normal (situation).
We recommend this servo use for steering control.
Screw for horn X1
ServosRSx / RSx2 Manual
KO DriverKO Driver 2015
Servo ManagerICS ServoManager Software Ver18.104.22.168
This software can setting for RSx/BRx2/RSxone10/BSx2one10/RSx-12. Also you can use setting data from our.
ServosRSx one10 Response Setting at 2015SnowBird
This is data for RSx one10 Response which used by Mr.Ishioka and Mr.Nagashima in the 2015 Snow bird race.
RSxOne10 Response for Out door asphalt truck
This is setting data which use for out door asphalt truck of the sedan car. This is data set by our driver who tested in the truck.
RSx RSx2 Factory setting data(for ICS Servo Manager2.0)
This is factory setting data which can use by Servo Manager2.0.
Servo Tab spacer
How to install KO Driver 2015 to Windows10