BSx2-one10 Response

No. 30205
End of production

[Specifications]

<Speed type servo>
#Torque: 13.3Kg-cm Speed: 0.08sec/60deg(@7.4V)
#Torque: 10.5Kg-cm Speed: 0.09sec/60deg(@6.0V)

#Dimensions: 40.5×26×21mm (Low Profile)
#Weight: 48.0g
#Operating voltage: 6.0 to 7.4V (Lipo,life,NI-MH)
#The hard alumite aluminum gear
#Brush-less motor
#Dual bearings
#The hard servo gear shaft
#The aluminum heat sink middle case
#Gold plated connector

#Recommend category
 1/10 EP Racing, 1/10 EP Off Road, 1/10 GP on road.
   *Please use for steering control.

Made in Japan.

  • Case & Gear

    Through repeatedly testing prototype samples for precision and durability, the most suitable specs for low-profile RC servos have been realized.

    Made in Japan

    The BSx2 series: all essential parts such as the case, the gear, the motor are made in Japan. At the domestic factory
    the close inspections are executed through the delivery to secure “Thorough Made in Japan” product reliability.

    New software for servo.

    The BSx software specially designed for the maximum performance has been developed.While corresponding to the speeding up response of high-end radios, the product secures the receptivity of the axis.
    BSx2 implements more advanced software.
    Try to mount the BSx servo in your cars and feel a new driving sense by all means!

    ICS

    You can change servo's setting when you use our software" ICS Servo Manager".
    Ex, parameter of stretch. More retentivity in High grip condition, less retentivity in Low grip situation,
    You can select value by grip situation for best setting servos.

     

     

    ---Note---

    The servo is powered on there may be a slight glitch, this is normal (situation).
    We recommend this servo use for steering control.

    Contents

    Servo x1
    Grommet x4
    Screw for Horn x1

  • BSx2-one10 Grasper

    End of production
    No. 30207

    BSx2-one10 Power

    End of production
    No. 30206

    RSx-one10 Type-S

    End of production
    No. 30120

    RSx-one10 Response

    End of production
    No. 30105

    RSx-one10

    End of production
    No. 30104

    Servo Model Selector

    End of production
    No. 61029

    ICS USB Adapter HS


    No. 61028

  • Servos

    BSx2 Manual

    KO Driver

    KO Driver 2015

    Servo Manager

    ICS ServoManager Software Ver2.0.1.0
    This software can setting for RSx/BRx2/RSxone10/BSx2one10/RSx-12. Also you can use setting data from our.

    Servos

    BSx2/ 3 Servos Factory setting data(for ICS Servo Manager2.0)
    This is factory setting data which can use by Servo Manager2.0.

    Dimensions draw BSx2-one10

  • About ServoModelSelector
    How to install KO Driver 2015 to Windows10